Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Scotts Valley, CA | Viceroy Construction
We provide independent Mr-Glass shower enclosure service across Scotts Valley, from Vine Hill to Scotts Valley Heights. The one thing that separates our Mr-Glass work here from anywhere else: we template glass off the actual settled floor, not the original plans, because canyon-slope crawlspaces shift in ways flat-lot bathrooms never do. Viceroy Construction is not a Mr-Glass authorized dealer or manufacturer affiliate. We’re a full-scope General Contractor – Scotts Valley with years of hands-on experience installing, repairing, and replacing Mr-Glass frameless, semi-frameless, and sliding shower systems on hillside homes throughout the 95066 and 95067 ZIP codes. Call (877) 358-6557 for a free estimate.
Why Scotts Valley Residents Choose Us for Mr-Glass Service
Mr-Glass enclosures live or die by their template measurements. A quarter-inch out of square at the curb and the door binds, the sweep drags, and the hinges start working against the glass. In Scotts Valley, where split-level ranches sit on slopes that move, that quarter-inch shows up routinely — the same issue we see on Mr-Glass repair in Lompico jobs. Neil Drummond, owner of Viceroy Construction, grew up in the Saratoga foothills and trained in the building trades program at West Valley College, where framing and structural coursework taught him to read a wall before trusting a measurement. That’s exactly what Mr-Glass service demands here. We’ve pulled enclosures apart on homes where the framing had settled a half-inch in a decade, and the glass never had a chance.
We stock genuine Mr-Glass hinges, sweeps, seals, and handles for fast turnaround on repair calls across Scotts Valley. When an OEM part is backordered, we use premium aftermarket seals only, never structural hinges. If your panel is intact, we repair and re-seal. If the glass is chipped at a hinge bore or the frame is bent, we’ll tell you replacement is the honest path instead of chasing a seal that will fail again in six months. That’s the detail that matters on a $2,000-plus enclosure.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Scotts Valley
- Fog-driven seal and sweep failure. The canyon fog that rolls through Scotts Valley most mornings keeps bathroom air damp year-round. Mr-Glass sweep seals and magnetic strips absorb that moisture, stiffen, and lose their grip on the glass. We replace them with OEM-grade sweeps and re-align the magnetic strips so the door actually seals against the tile curb again.
- Out-of-plumb pivot and hinged doors on split-level homes. Scotts Valley’s 1960s-to-1980s ranch and split-level stock has framing that’s had decades to settle. A Mr-Glass frameless pivot door templated to the original wall binds at the top or drifts open on its own once the wall moves. We re-template off the current, settled opening rather than trusting forty-year-old dimensions.
- Base channel shifts from slab heave and root movement. Redwood root systems on steep lots push against foundations over time. When a slab heaves even a half-inch, a Mr-Glass base channel tilts, the water line fails, and the factory seal is effectively dead. We see this constantly on hillside bathrooms. The fix is re-leveling the curb, resetting the channel, then re-sealing the full enclosure before it damages the subfloor.
- Stripped finishes and sagging hinges from aftermarket substitutions. We’ve followed previous “glass repair” technicians who installed generic hinges on Mr-Glass enclosures. The chrome finish strips after a year, and cheap pivots sag under the weight of a custom tempered panel. We source genuine Mr-Glass hardware so the glass and hardware stay matched.
- Cracked tile curbs beneath aging pivot enclosures. Years of a dragging Mr-Glass door grinding across a curb will crack the tile. On a slope-settled Scotts Valley bathroom, that crack lets water into the substrate and starts the rot clock. We repair or replace the curb, then re-hang the enclosure with fresh hinges and a proper sweep so the door closes clean again.
Mr-Glass Service in Scotts Valley: What Local Conditions Mean for Your Equipment
Scotts Valley sits in a narrow redwood-and-tanoak canyon between the Santa Cruz Mountains and the coast. That geography shapes construction here more than most people realize. Because so many Scotts Valley bathrooms sit over crawlspaces cut into a hillside, floor deflection is routine and often invisible until you try to hang a frameless glass panel. We routinely find Mr-Glass enclosures out of square not because the original install was sloppy, but because the floor under the curb has dropped or heaved since the house went up. A bathroom in the Vine Hill area, for example, might sit over a crawlspace that moves a quarter-inch between wet and dry winters. That movement cracks the silicone line at the base channel and lets water track behind the enclosure. So when we template Mr-Glass glass for a Scotts Valley bathroom, we template off the actual settled floor, not the original prints. That one habit prevents more callbacks than any seal or hinge specification.
We saw this play out on a split-level ranch in Vine Hill. The homeowner’s Mr-Glass pivot door had been dragging for years. Our crew pulled the enclosure and found a cracked tile curb and a base channel shifted by a slab that had heaved slightly. We re-leveled the curb, reset the channel, and installed a new custom-templated Mr-Glass frameless panel with fresh OEM hinges and sweep. The door closes with a clean seal now. That job is the difference between a glass installer who measures and one who reads the structure first.
Mr-Glass Models & Products We Service in Scotts Valley
We service the full Mr-Glass shower enclosure range: frameless shower door systems (standard and custom-cut panels), the sliding shower door series, neo-angle corner enclosures, and semi-frameless pivot doors. On custom-cut frameless panels, we re-measure the opening before ordering, because a Scotts Valley wall that measured 59⅜ inches ten years ago may not be 59⅜ inches now. For parts, we keep genuine Mr-Glass hinges, sweeps, seals, and handles in rotation for the most common enclosure styles, and we’ll tell you honestly when a premium aftermarket seal makes sense versus waiting on a backordered OEM piece. The rule: OEM on structural hardware, never on hinges that carry a tempered panel’s full weight.
If you’re weighing a full shower remodel rather than a repair, we handle Mr-Glass sales & service as part of broader bathroom work, including walk-in shower installation, tub-to-shower conversions, and full bath remodels. Scotts Valley service area coverage includes both 95066 and 95067.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Scotts Valley
What drives the cost on a Mr-Glass repair or replacement in Scotts Valley: whether the glass is intact, whether the curb has cracked, and how far out of square the opening has settled. A simple seal and sweep replacement runs at the low end. A full custom-templated frameless panel with new hardware and a re-leveled curb lands higher, because the labor includes structural correction, not just glass work. Here are the line-item ranges we work within:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
Every quote is free and line-itemed, so you see exactly what the glass, hardware, and labor cost before you sign anything. Call (877) 358-6557 and Neil or one of our crew will come out, measure the actual settled opening, and give you a number you can plan around.
Serving Scotts Valley, CA — Our Local Coverage Area
We’re based in the Scotts Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Scotts Valley
Yes, if the glass is intact and the hinge bores aren’t chipped or cracked, we can replace just the sweep seal, magnetic strip, or hinge. This is the most common call we get. The catch in Scotts Valley is that a leak that’s gone unnoticed for years may have soaked the curb or subfloor. We’ll check before we swap parts and re-seal, so you’re not fixing half the problem. Call (877) 358-6557 for an exact quote, free.
It does. The persistent moisture in shaded Scotts Valley bathrooms means seal degradation happens faster than it would on a dry, sunny lot. A failing Mr-Glass sweep lets water pool on the curb, and that damp tile in a foggy, shaded room is a mold incubator. Replacing worn seals and keeping the silicone line intact is the most reliable defense. We can inspect and re-seal yours for a fair charge, call (877) 358-6557.
We template off the settled floor, not the original plans. On Scotts Valley hillside homes, that’s the difference between a door that seals and one that binds or drifts. If the substrate under the curb has heaved or cracked, we correct that before setting the channel. The glass gets cut to the real opening, not the opening from 1978.
No. Viceroy Construction is an independent general contractor. We install, repair, and service Mr-Glass products on their own merits, and we source genuine Mr-Glass parts, but there’s no manufacturer authorization or affiliation. That independence means we tell you when a seal is worth replacing and when a panel should be scrapped, without a brand quota in the back of our minds.
In Scotts Valley, a straightforward Mr-Glass panel replacement with new hardware typically falls between $3,000 and $8,500 depending on glass size, hinge configuration, and whether the curb needs re-leveling. If the job expands into a full walk-in shower or Home Remodeling in Scotts Valley like a tub-to-shower conversion, pricing moves into the $3,500 to $12,000 range. For an exact number, call (877) 358-6557. Estimates are free and take about an hour on site.
Service Areas Near Scotts Valley
We serve Scotts Valley, Mount Hermon, Felton, and the surrounding Santa Cruz Mountains communities. For neighbors in those areas, see Mr-Glass service in Mount Hermon or Mr-Glass service in Felton. Over the hill, we also run jobs in Saratoga, Monte Sereno, and Los Gatos.
Book Your Mr-Glass Service in Scotts Valley Today
Neil Drummond walks every job himself before calling it done. The details you don’t see are the ones that matter most. Call (877) 358-6557 and we’ll schedule a free estimate for your Mr-Glass repair or replacement in Scotts Valley.
Written by Neil Drummond, Owner at Viceroy Construction, serving Scotts Valley and the Santa Cruz Mountains since the early years of hillside remodeling in the canyon.