Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Felton, CA | Viceroy Construction
CGI construction service in Felton means working with a contractor who understands both the product line and the San Lorenzo Valley’s exacting build environment. Viceroy Construction installs and renovates with CGI cabinetry, countertops, and roofing across Felton’s 95018 ZIP code, with every project spec’d to WUI fire code and the realities of redwood-rooted slopes. We’re an independent CGI service provider, not manufacturer-affiliated or authorized, which means our recommendations come from job site experience, not a dealer agreement. Call (877) 358-6557 for a free estimate on your Felton project.
Why Felton Residents Choose Us for CGI Service
Felton homeowners deal with conditions most contractors in Santa Cruz or Scotts Valley never face: pier-and-stem-wall foundations on steep grades, winter moisture cycling through old redwood cabins, and WUI code requirements that tie a kitchen remodel to the roof assembly. We’ve spent years working in those conditions, and we know how CGI products hold up when they’re installed correctly for this valley. Neil Drummond grew up in the Saratoga foothills and trained in the building trades program at West Valley College, where the framing and structural coursework still informs how we scope a hillside kitchen or a metal roof on a CZU rebuild. When you call us for CGI service in Felton, you’re not getting a parts runner. You’re getting a contractor who walks the lot, checks the subfloor, and specs the job so the details you don’t see are the ones that matter most.
We’re a full-scope CGI sales & service contractor, which means the same crew that sets your CGI cabinets can re-level the floor they sit on and flash the roof above them. That continuity matters a lot in Felton, where a countertop seam failure often traces back to a foundation issue, not a bad slab.
Styles & brands we work with
Common CGI Construction Problems We Solve in Felton
- Delaminated CGI cabinet doors and drawer fronts. Older Felton cabins and 1960s-era mountain homes rarely have proper vapor control. Moisture moves through redwood-era wall assemblies all winter, and factory-finished CGI cabinet faces start to cup or peel. We replace affected boxes with new CGI units and install OEM hinges and slides so alignment and finish match exactly.
- CGI quartz seam failures on hillside homes. When a Felton home sits on pier-and-stem-wall framing on a sloped lot, the floor flexes. Not much, but enough to stress a quartz countertop seam over time. We see opened seams and edge chips on CGI tops set over floors that were never leveled to the framing before install. Our fix starts under the counter, not on top of it.
- Leaking CGI metal roofing at deck-to-roofline transitions. Heavy San Lorenzo Valley rain finds every flashing error. On CGI metal roofs we’ve repaired across Felton, the leak usually traces to an improperly flashed panel seam where a deck ledger meets the roofline or where a valley drains against a sidewall. We re-flash and replace panels according to the original CGI panel profile and WUI-compliant underlayment.
- Heaved and leaning CGI fence posts. Redwood roots push, saturated clay soil expands, and shallow footings lose the battle after a wet season. Vinyl and aluminum CGI fence posts set in minimal concrete start to lean within two or three winters on Felton hillsides. We set posts to depth below the root zone where grading allows, and backfill with drainage stone so wet season heave doesn’t tilt your fence line.
- CGI cabinet box water damage from roof or vent leaks. A small roof leak over a kitchen in a Felton cabin becomes a big cabinet problem fast. We replace swollen CGI cabinet boxes, but only after correcting the roof or vent assembly that caused the water in the first place. A cabinet swap without fixing the moisture source is a waste of your money.
CGI Service in Felton: What Local Conditions Mean for Your Equipment
Since the CZU Lightning Complex fire, CGI kitchen and bath packages we install on Felton rebuilds and remodels frequently have to be spec’d alongside WUI-compliant assemblies. Ember-resistant vents, fire-resistant siding, Class A roof coverings. A cabinet or countertop order in Felton is tied to the roof and the envelope in a way it isn’t on flatland Santa Cruz jobs. Take a kitchen remodel on a rebuild off Highway 9 near downtown Felton: you can’t just order CGI shaker cabinets and a quartz top and call it done. The venting at the range hood has to be ember-rated. The exterior wall behind those cabinets needs the right fire-resistant sheathing. The roof above the kitchen has to be Class A. We coordinate the full scope so your CGI order fits into the WUI system rather than fighting it. A generic remodeler might sell you the cabinets. They won’t flag that the hood vent spec changes under WUI code, and that’s the kind of miss that gets caught at inspection and costs you weeks.
CGI Models & Products We Service in Felton
We work with CGI’s ready-to-assemble kitchen and bath cabinetry lines, including shaker and slab door styles in the standard finishes most Felton homeowners choose for mountain kitchens. For countertops, we install CGI quartz and granite through the prefab program, which sizes well for the smaller footprints common in redwood-era cabins and CZU rebuilds. We also service CGI vinyl and aluminum fencing systems, plus CGI and partner metal roofing panels used on post-fire rebuilds. Our parts approach is simple: we use CGI OEM hinges, drawer slides, and panel trims so door alignment and finish stay true. We sub in quality aftermarket hardware only when OEM is unavailable or clearly inferior. For the fastest possible Felton turnaround, we keep common OEM hardware and touch-up materials in stock. Fast means days, not weeks, when a cabinet door or a fence gate needs repair.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Felton
CGI construction work in Felton spans a wide range because we’re often working with existing structure rather than clean, level ground. Here are the price ranges we see across the 95018 area:
| CGI Service / Project | Typical Felton Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
Your final number depends on the condition of the subfloor, whether we’re correcting a water or vapor issue, and whether the job sits inside a WUI rebuild scope. We give written line-item estimates for every CGI project in Felton. No vague allowances. Call (877) 358-6557 and we’ll walk the site and price it properly.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well, and we also provide CGI service in Mount Hermon. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Felton
Yes, and we do it routinely. CGI cabinets and countertops are interior finishes, so WUI code doesn’t restrict them directly, but the assemblies they sit in, like the wall assembly, venting, and roof covering, do need to meet current fire code. We spec the CGI kitchen package alongside those assemblies so the whole project passes inspection as one system. On a CZU-era rebuild off a sloped lot near downtown Felton, our crew replaced warped, delaminating CGI cabinet boxes and a heaved quartz top in a kitchen that had been closed up through wet winters with no vapor control. We re-leveled the subfloor over the pier-and-stem-wall framing, installed new CGI shaker cabinets with OEM slides and hinges, set a new quartz top with properly supported seams, and tied the venting and roof flashing detail to the home’s WUI requirements so the same moisture cycle wouldn’t return. Call (877) 358-6557 to have us look at your rebuild scope.
The most common cause we find is a subfloor that flexes because the home sits on pier-and-stem-wall framing over a sloped lot. Small movement over months and years concentrates stress at the seams and edges of a quartz top, even a well-made CGI one. Temperature swings from Felton’s dry summers to wet, cold winters don’t help. The fix usually starts with re-leveling the subfloor or installing proper cabinet support before the new top goes down. Replacing the quartz without addressing the floor is a short-term patch. Call (877) 358-6557 for an exact assessment, estimates are free.
CGI metal roofing panels, when installed over WUI-compliant underlayment and properly flashed at every transition, hold up well against San Lorenzo Valley rain and give you the Class A fire rating most Felton insurers now ask for. The weak point is never the panel. It’s the flashing at valleys, sidewalls, and deck-to-roof junctions. We’ve repaired enough badly flashed CGI roofs in Felton to know exactly where the water gets in. If your CGI roof is leaking, we’ll find the true entry point and re-flash it properly. Call (877) 358-6557 for a roof assessment.
Yes. Redwood root zones are protected under Santa Cruz County tree ordinances, and they physically limit where you can dig footings or pour concrete without damaging protected trees or destabilizing a hillside. For a CGI service in Lompico or Felton vinyl or aluminum fence, we sometimes have to shift post spacing or use deeper, narrower footings to avoid cutting through major roots. For an addition, foundation plans may need to move or switch to a pier-and-grade system entirely. We plan around the roots from the start rather than discovering a problem halfway through. Call (877) 358-6557 to schedule a site walk.
A full CGI kitchen remodel in Felton typically runs $14,000 to $45,000, a bathroom $9,000 to $28,000, and countertops alone $2,000 to $6,500. Repairs, like a single cabinet door or a fence section, cost far less. Our rule is this: if the cabinet box or roof panel is structurally sound, we repair and re-flash it. We push replacement when water damage has compromised the structure or the existing work can’t meet current WUI code. Repairing a burned or water-rotted box is false economy. Call (877) 358-6557 and we’ll give you a straight answer, plus a written quote either way.
Service Areas Near Felton
Beyond Felton, we serve the surrounding San Lorenzo Valley and South Bay communities, including CGI service in West Menlo Park, CGI service in Bonny Doon, Saratoga, Monte Sereno, and Los Gatos. If your home sits on a slope, a redwood lot, or inside a WUI zone, we know the terrain. Check our Felton service area page or call us to confirm coverage.
Book Your CGI Service in Felton Today
If you’re dealing with a leaking CGI metal roof, a cracked quartz top on a hillside kitchen, or a full CZU rebuild in Felton, call (877) 358-6557. We’ll schedule a site visit, scope the work, and give you a written estimate. No pressure, no vague allowances, just a straight read on what your house needs.
Written by Neil Drummond, Owner at Viceroy Construction, serving Felton and the San Lorenzo Valley.