Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Saratoga Homeowners Choose CGI Construction
Viceroy Construction provides independent CGI service in Saratoga, including cabinetry installation and refacing across the West Valley. We’re not a CGI dealer or authorized service center, but we’ve installed and repaired enough CGI Allure thermofoil doors, Carlisle raised-panel fronts, and RTA plywood boxes in Saratoga kitchens to know exactly how they fail and what fixes actually last. Homeowners call us when peeling foil edges, sagging islands, or out-of-square drawers need someone who’s seen the problem before. If you own CGI cabinets in Saratoga and something isn’t right, call (877) 358-6557 for a straight answer and a free estimate.
Why Trust Viceroy Construction for Your CGI Construction?
Neil Drummond, our owner, grew up in the Saratoga foothills near the old orchard land along Cox Avenue and trained in the building trades program at West Valley College, where framing and structural coursework taught him what holds a kitchen together long before the doors go on. That’s the detail that matters with CGI cabinets: the boxes, blocking, and leveling underneath are what keep thermofoil doors from peeling and drawer slides from racking. Neil still walks every job himself before calling it done. The details you don’t see are the ones that matter most.
We know CGI’s product lines well enough to diagnose a failing Allure door joint from across the room. We understand how heat from a Saratoga dishwasher vent or range concentrates on foil-wrapped edges, and we’ve repaired enough Carlisle glazed corners to know when a touch-up kits works and when a door front needs replacing. As an independent Cupertino CGI service provider and beyond, we work on the cabinetry itself, no manufacturer warranty endorsement or partnership involved. That independence means we recommend what’s right for your kitchen, not what’s easiest for a brand program. We’re licensed, insured, and we pull permits when the scope requires them.
Styles & brands we work with
Common CGI Construction Problems We Fix in Saratoga
- Thermofoil edge delamination on Allure-series doors. Foil-wrapped doors peel first where heat and moisture concentrate: the dishwasher vent panel, the cabinet above the range, and the sink base front. The adhesive bond breaks down over years of temperature cycling, and once an edge lifts, it spreads. We can sometimes re-bond an early lift, but more often the right fix is a new door front, re-wrapped or painted to match the run.
- Hairline cracks at stile-and-rail joints on Carlisle raised-panel doors. The painted and glazed MDF panels move with Saratoga’s dry-summer to wet-winter swings. The joints where rails meet stiles are the first to show it. Tiny cracks near glazed edges are cosmetic at first, but water gets in and swells the MDF if they’re ignored too long.
- Sagging islands and runs under quartz or granite tops. This is almost always an installation problem, not a cabinet problem. If the island wasn’t blocked, shimmed, and leveled properly before the stone went down, the box takes a point load it was never designed to carry. We find this regularly on CGI particleboard and thin-box case goods in Saratoga remodels done by crews who rushed the base.
- Drawer boxes that rack or doors that won’t close flush. Undermount slides set out of square, a slab floor that shifted, or a wall that’s drifted out of plumb, any of these will make drawers rub, rack, or pop off their clips. CGI drawers are fine when the hardware is installed true; they’ll never close properly if the opening itself is out of square.
- Soft-close hinge and slide failures in high-use base cabinets. The trash pull-out, the pots-and-pans drawer under the cooktop, the everyday silverware drawer: these take thousands of cycles a year. When a hinge or slide wears out, we replace it with a quality aftermarket unit that matches the existing hardware footprint, rather than forcing an OEM part that may be discontinued.
CGI Parts & Our Repair-vs-Replace Approach
We match genuine CGI doors, drawer fronts, and hardware where they’re still available, because a partial kitchen should look seamless, not patched. When an OEM CGI part is discontinued or a straight upgrade makes more sense, we source quality aftermarket slides, hinges, and shelf pins from brands we trust. Our bias on thermofoil doors is repair first, but not blindly: a few peeling edges get replaced fronts; twenty failing doors on sound boxes mean refacing beats a full tear-out.
We decide repair versus replace by looking at the boxes, not the doors. If the casework is intact, level, and dry, refacing is a better investment than demolition. If the boxes are water-swollen, oil-soaked, or structurally compromised, we’ll tell you honestly that refacing is throwing money at a problem that won’t stay fixed. Call (877) 358-6557 and we’ll assess your CGI kitchen in person.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We inspect every box, door, drawer, and the floor and wall plane behind them. For a peeling Allure door, we check the moisture source, not just the symptom. For a sagging island, we check what’s underneath before we touch the top.
- 2
Repair or reface. We replace failing fronts with matched CGI doors where possible, re-square and re-block runs that need it, and set slides true. For jobs where every door is failing, we reface: new CGI doors and drawer fronts, new hinges, touch-ups on the casework, everything fitted to the existing boxes.
- 3
Test. Every drawer cycles open and closed a half-dozen times under load. Every door is adjusted for reveal, gap, and soft-close behavior. We don’t sign off until the hardware behaves.
- 4
Warranty. Our workmanship is warrantied in writing. If a door we set rubs or a slide we installed fails within the covered period, we come back and fix it. No phone tag, no subcontractor blame game.
CGI Products We Service & Install in Saratoga
We work on CGI Allure series thermofoil slab and shaker doors, Carlisle raised-panel painted and glazed MDF doors, RTA plywood-box cabinetry for kitchens and baths, and CGI wood-look and painted vanity cabinets and linen towers. We stock common hinge, slide, and shelf-pin hardware locally for fast turnaround in Saratoga and CGI service in Campbell, and we order matched CGI door and drawer fronts directly when a job needs exact color and profile matching.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
CGI is one brand we know deeply, but we also install and remodel with KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler, Grohe, Toto, and Moen plumbing. One contractor, every trade, one point of contact. If your CGI kitchen is getting a full remodel rather than a repair, we can handle the countertops, backsplash, and fixtures under the same contract.
FAQs – CGI Construction Service in Saratoga
If the peeling is limited to a few doors and the boxes underneath are sound, you don’t need all-new cabinets. We replace the failing door fronts with matched CGI doors and address the moisture source so new doors don’t peel the same way. When peeling is widespread across most of the kitchen, refacing all fronts on the existing boxes is usually the smarter investment than a full rip-out. Call (877) 358-6557 and we’ll give you an honest read in person.
Yes. We order CGI doors, drawer fronts, and hardware in the original finish and profile where the line and color are still in production. For discontinued CGI colors or door profiles, we match the closest available style, or reface the entire run so everything reads as one consistent kitchen. Color-match differences between a single new door and twenty-year-old existing doors are real, and we’ll tell you if blending is a problem before we order parts.
In nearly every case we see in Saratoga, the island wasn’t blocked, shimmed, and leveled properly before the stone went on. The weight of a quartz or granite top, especially a large island with overhangs, needs to transfer through framing and blocking to the floor, not through the cabinet box alone. When the box takes that point load, it sags, doors rack, and drawers bind. We fix it by lifting the top, re-blocking and re-leveling the base, and squaring everything up before the stone goes back down.
If your CGI boxes are dry, level, and structurally intact, but the doors are failing, refacing is the better investment. You keep the casework, we order new doors and drawer fronts, and the kitchen looks completely new for a fraction of full replacement cost. If the boxes are water-damaged, delaminating, or sagging, a full replacement or a targeted remodel makes more sense. The right call depends on the boxes, and we’ll show you what we’re looking at. Call (877) 358-6557 to schedule a free estimate.
Yes. We supply and install Cambria, Silestone, and Caesarstone countertops and can coordinate the backsplash in the same job. If your countertop needs to come off for an island re-level or a reface, we handle the removal, fabrication, and reinstallation under one contract, so you’re not juggling a stone fabricator and a cabinet crew on your own.
CGI Construction Pricing in Saratoga
Pricing varies by scope, but below are the ranges we typically see for CGI cabinet and kitchen work in Saratoga. These reflect current market rates in this area, not national averages:
| Service | Saratoga Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every job gets a written, line-item estimate before work starts, so you know exactly what you’re paying for. No change-order games once the contract is signed.
Book Your CGI Service in Saratoga, CA
If your CGI cabinets are peeling, sagging, racking, or just tired, we’ll come take a look and tell you straight what needs fixing and what doesn’t. Call (877) 358-6557 to schedule your free estimate in Saratoga or for CGI repair in Monte Sereno. One contractor, every trade, one point of contact.
Written by Neil Drummond, Owner at Viceroy Construction, serving Saratoga and the West Valley since he started in the trades at West Valley College.