Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in Mountain View, CA | Viceroy Construction
We provide independent Master Halco fence and gate service across Mountain View, and the work here is different because so many west-side yards sit on original Eichler radiant slabs. That means every Master Halco fence post, gate footing, or driveway edge we touch has to account for copper piping that an auger can sever in about four seconds. Before anything goes in the ground, we scan and hand-dig. If you’re dealing with a bowed vinyl privacy run or a racked aluminum picket section, call Viceroy Construction at (877) 358-6557 and we’ll walk the property with you.
We’re a general contractor that installs and repairs Master Halco fencing, rail, and gate systems as part of the full landscape of work we do across Mountain View. Learn more about our Master Halco sales & service experience, or keep reading for what this brand actually does in Mountain View soil.
Why Mountain View Residents Choose Us for Master Halco Service
We’ve worked Los Altos Hills Master Halco service vinyl, aluminum, and ornamental steel across Waverly Park, Monta Loma, and the infill lots near downtown long enough to know where these products hold up and where they don’t. We are not an authorized Master Halco dealer. We are an independent installer, which means we repair or replace based on what the product is actually doing in your yard, not on a sales target.
Neil Drummond, our owner, grew up in the Saratoga foothills and trained in the building trades program at West Valley College, where he learned framing, concrete, and structural work the hard way: by doing it. That matters when a fence post has to go within three feet of a 1950s radiant slab. The details you don’t see are the ones that matter most. We carry Master Halco OEM panels, posts, caps, and hardware when a match is needed, and we stock upgraded aftermarket gate hardware where it’s genuinely stronger than factory spec. For General Contractor – Mountain View homeowners, that means fewer callbacks and a fence line that looks consistent panel to panel.
This page covers what we do specifically in Mountain View service area. If you need a fence installed, a gate re-hung, or a driveway replaced alongside it, we’re the single contractor for all of it.
Styles & brands we work with
Common Master Halco Construction Problems We Solve in Mountain View
- Sun-bowed and brittle vinyl privacy panels. Mountain View’s dry summers hammer west-facing vinyl runs in Waverly Park and Monta Loma, and winter rain cycling makes panels expand and contract at the tongue-and-groove joints. We replace brittle panels with matching Master Halco OEM sections and re-set posts where the extrusion has popped caps or sagged.
- Racked aluminum picket sections on infill lots. Townhome and infill construction near downtown often leaves cut grade that was never recompacted. Aluminum picket fence sections rack out of plumb in that loose soil, so gates drag and latch hardware shears. We re-level the run, re-set posts on proper bases, and replace the worn hardware.
- Rust bloom on ornamental steel gates and posts. Ornamental steel and iron-style gates that live through a few damp Mountain View winters develop rust at factory weld points and powder-coat chips. The streaks bleed onto new pavers and concrete. We grind, treat, and re-coat where the post is sound, and replace posts where the rust has penetrated the wall.
- Heaving vinyl post footings from prior trenching. When a remodel trench was cut too close to a fence line, or a post was set shallow, the first real storm leaves posts leaning. On Eichler lots, that same trench can pass near radiant-slab copper. We scan before digging and set Master Halco posts on footings that can handle Mountain View’s wet-season groundwater movement.
- Gate post movement tied to Eichler slab work. We see gate posts shift within a season when a contractor poured a footing next to old radiant slab plumbing and didn’t account for drainage. The post leans, the gate drags, and the latch stops catching. We re-set the post properly and re-hang the gate so it opens like it was installed yesterday.
Master Halco Service in Mountain View: What Local Conditions Mean for Your Equipment
Here’s the thing that separates Mountain View from Master Halco in Sunnyvale or Palo Alto when it comes to Master Halco work. On Eichler homes in Waverly Park and Monta Loma, original 1950s radiant floor slabs have copper piping that runs right under the yard, sometimes less than two feet from existing fence lines. An auger or a fast backhoe operator doesn’t feel that copper. It punctures instantly, and then you’re tearing out a slab to fix a heat loop. That’s why we scan and hand-dig before any Master Halco post goes in the ground on those tracts. We’ve done the same on Cuesta Drive, Grant Road, and the streets around Landels Elementary. The fence work is straightforward. The pre-construction step is what protects the house. A generic Master Halco page will tell you their vinyl extrusion specs. It won’t tell you that the real risk on a Mountain View Eichler lot is what’s already under the grass.
One Waverly Park job stands out as typical. The homeowner had a failing vinyl privacy run beside a low-slope Eichler roof. We scanned the yard before excavation, hand-dug the new Master Halco post holes to stay clear of the radiant-slab copper, and re-set the gate posts on deeper footings. We replaced the bowed, sun-brittle panels with matching OEM Master Halco panels, re-hung the gate with upgraded aftermarket hardware, and finished before the fall storms so drainage and weather-tight detailing were done in one pass. That’s the kind of sequencing Mountain View work demands.
Master Halco Models & Products We Service in Mountain View
We install and repair Master Halco vinyl privacy fencing, including Bufftech-style tongue-and-groove and board privacy panels. We work on Master Halco aluminum pool and security code fencing, the rust-free picket panels that meet Mountain View code for pool enclosures. We service ornamental steel and iron-style fence and gate systems, and we install vinyl ranch rail and split-rail fence kits for larger lots and frontage runs.
When a match is needed, we use Master Halco OEM replacement panels, posts, caps, and hardware so the fence line stays visually consistent. For gate hardware, we stock quality aftermarket hinges, latches, and closers where they are genuinely stronger than what came with the panel. We keep common Master Halco panel profiles and post sizes on hand for fast Master Halco repair in Loyola and Mountain View jobs, and we order exact-color vinyl extrusions when a fade-matched panel matters. If a run has more than a few sun-bleached, brittle panels, honest replacement usually beats patching. We’ll tell you straight which side of that line your fence is on.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in Mountain View
What you’ll pay depends on what is currently in the ground and what Mountain View soil is doing to it. A clean vinyl fence install on a flat lot is a different number than re-setting posts around a radiant slab that needs hand-digging. Here’s where our work typically lands:
| Service | Typical Mountain View Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Roof Repair | $400 – $1,800 |
These ranges cover typical Mountain View residential jobs. The final number depends on linear footage, access, post depth, whether we’re working around Eichler radiant-slab copper, and whether we’re tying the fence line into a driveway replacement or a roof repair scope. Our free estimate includes the scan when we’re on slab-risk lots, and we give you a written line-item quote before any work starts. Call (877) 358-6557 to schedule yours.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in Mountain View
Do you install Master Halco fencing as an authorized dealer?
No. Viceroy Construction is an independent installer. We are not authorized, sponsored, or endorsed by Master Halco. We use Master Halco OEM parts when a visual match is needed because they fit the existing extrusion correctly, and we use aftermarket hardware where it is structurally better.
Do you use Master Halco OEM parts or aftermarket replacements?
Both, depending on what the fence needs. We use Master Halco OEM panels, posts, caps, and hardware for visual and dimensional matches. For gate hinges, latches, and closers, we often use upgraded aftermarket hardware that handles Mountain View’s wet-season movement better than factory parts. We’ll show you what we’re using and why before it goes in.
How long does Master Halco fence service take in Mountain View?
Most vinyl or aluminum fence installs run two to four working days, assuming no rain. Jobs on Eichler or radiant-slab lots can add a day for scanning and hand-digging. We schedule around Mountain View’s fall rainy season so footing pours and drainage work cure before the first significant storms. Call (877) 358-6557 and we’ll give you a real timeline for your lot.
Which Master Halco fence models do you cover in Mountain View?
Vinyl privacy panels including the Bufftech-style tongue-and-groove and board profiles, vinyl ranch rail and split-rail kits, aluminum pool and security picket panels, and ornamental steel and iron-style fence and gate systems. If you’re not sure which line you have, send us two photos and we’ll identify it before the first visit.
How much does Master Halco fence repair cost in Mountain View?
A gate re-hang with hardware replacement usually falls between $400 and $1,800 depending on what’s bent, rusted, or sheared. A full vinyl fence replacement runs $3,500 to $9,000, and aluminum runs $4,000 to $10,000. For an exact number on your fence line, call (877) 358-6557 to schedule a free estimate.
Why do fences fail faster on Mountain View Eichler lots?
Three reasons overlap. Radiant-slab copper creates excavation risk that pushes some contractors toward shallow footings. South-facing vinyl gets hammered by Santa Clara Valley UV. And winter rains raise groundwater enough to heave shallow-set posts. We design for all three on every west-side Mountain View job.
Service Areas Near Mountain View
We serve the full Master Halco service in Communications Hill corridor and the surrounding South Bay. Our crews regularly work in Saratoga, Monte Sereno, Los Gatos, Cupertino and Campbell, and we cover Master Halco service in Los Altos for homeowners who need the same scan-before-dig approach on mid-century lots.
Book Your Master Halco Service in Mountain View Today
If your vinyl panels are bowing, your gate drags across the concrete, or you’re planning a driveway replacement and want the fence line handled at the same time, call (877) 358-6557. We’ll schedule the walk-through, scan for radiant-slab copper where needed, and give you a written estimate before any work starts.
Written by Neil Drummond, Owner at Viceroy Construction, serving Mountain View and the wider South Bay since the early 2000s.