Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in Felton, CA | Viceroy Construction
We provide independent Master Halco fencing and gate installation, repair, and replacement across Felton and the San Lorenzo Valley. The difference in our Master Halco work here is simple: we spec every post, panel, and gate for steep redwood lots, winter rain runoff, and the WUI fire codes that govern post-CZU rebuilds in the 95018 ZIP. Call (877) 358-6557 for a free estimate, and we’ll tell you straight whether a repair or a full replacement makes more sense.
If you’re searching for Master Halco sales & service from a contractor who actually understands Felton’s terrain, you’ve found the right page. Viceroy Construction has installed and repaired Master Halco fencing lines across the San Lorenzo Valley for years, from redwood-era cabin lots to fresh post-CZU rebuilds. We know how their steel, aluminum, and ornamental systems behave under redwood canopy, on sloped lots, and through wet winters. One contractor, every trade, one point of contact.
Why Felton Residents Choose Us for Master Halco Service
Master Halco manufactures solid fencing, but the difference between a fence that lasts fifteen years and one that starts fighting you in five comes down to how it’s set. Neil Drummond grew up in the Saratoga foothills and trained in the building trades program at West Valley College, where the framing, concrete, and structural coursework taught him what happens when posts go into shifting ground. He still walks every Felton job and every Master Halco service in Ben Lomond himself before it’s done. The details you don’t see are the ones that matter most.
We’re an independent contractor, not authorized, sponsored, or endorsed by Master Halco. That independence means we choose materials based on what actually works on your lot, not what a manufacturer’s program pushes. We use Master Halco OEM-compatible components and matched hardware when they exist, and we stock the common panel sections, hinges, latches, and post bases that keep Felton turnaround times short. When OEM parts are discontinued or priced unreasonably, we use quality aftermarket equivalents and tell you why.
Styles & brands we work with
Common Master Halco Construction Problems We Solve in Felton
- Powder-coat chalking and blistering on aluminum ornamental panels. West-facing fence runs in Felton take direct afternoon sun and then soak in redwood duff moisture all winter. That cycle breaks down cheap powder coating faster than anything. We strip, etch, and re-coat salvageable panels, or swap in matched Master Halco replacements when the substrate is gone.
- Post base and footing failure on sloped lots. Felton’s steep redwood-rooted soils heave and settle with every wet season. Shallow-set posts lean, lift, or crack at the base plate. We re-set with deeper footings, proper drainage rock, and post bases sized for lateral load on the slope, not just a flatland spec.
- Gate sag and hinge wear on slope-stepped runs. A gate hung level on a slope-following fence line will sag, bind, and tear hinges within a few seasons. Felton’s stepped lot lines make this common. We re-hang with adjustable hinges and reinforce the hinge post so the leaf stays square for years.
- Rust bleed and fastener corrosion on creek-side lots. Shaded, damp lots near Zayante Creek and Bean Creek hold moisture against steel panels and hardware. We replace corroded fasteners with stainless or coated equivalents and treat rust before it spreads under the coating.
- Old wood fence lines that don’t meet current WUI code. After the CZU Lightning Complex fire, many Felton rebuilds need non-combustible site hardening. We replace aged redwood or cedar lines with Master Halco steel or aluminum fencing and ember-resistant gate hardware where the original cabin had combustible fencing.
Master Halco Service in Felton: What Local Conditions Mean for Your Equipment
Here’s the thing flatland contractors in Santa Cruz or Scotts Valley miss: Felton’s post-CZU rebuilds must meet current WUI code, fire-resistant siding, ember-resistant vents, Class A roofs, and that hardening logic extends to your site work. On rebuild lots along Highway 9 and up in Lompico, we’re often specifying non-combustible metal fencing where the original property line ran a wood fence and wooden gate. That’s not a cosmetic upgrade. It’s part of a defensible-space plan your insurer will actually sign off on.
Redwood root zones force another Felton-specific decision. You can’t always dig post holes where the old fence sat, not without wounding protected trees or hitting root masses that reject concrete. We’ve shifted entire fence lines to stepped Master Halco aluminum panels on deeper footings set outside root zones, then staggered panel heights to follow the slope. Flatland installers don’t budget for that, and the result is a fence that leans within two winters.
Master Halco Models & Products We Service in Felton
We install and repair the Master Halco lines that show up most in the 95018 area: decorative aluminum fences from the Infinity and Sierra families, steel ornamental systems, welded wire and chain-link for creek-side and rural lots, and redwood or cedar wood panels, posts, and gates where WUI code still allows combustible fencing away from structures.
Our parts approach is honest. For a fence run with surface rust or a single failed post, we repair. We’ll replace individual panels, re-set footings, and match hardware before we pitch a full tear-out. For a run with systemic coating failure or footings settling across the line, we recommend replacement and explain the numbers on both sides. We carry common Master Halco components locally so Felton jobs aren’t waiting on a warehouse in Dallas.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in Felton
Here’s what Master Halco-related work costs in Felton. These ranges reflect our San Lorenzo Valley pricing with slope, redwood root, and WUI compliance factored in. You’ll notice we don’t pad with change orders. The estimate you get is the number we stick to unless you change scope mid-job.
| Service | Typical Felton Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Garage Conversion | $30,000 – $80,000 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
Slope steepness, redwood root clearances, and whether you need a full WUI-compliant spec all move the number. Call (877) 358-6557 for an exact quote on your Felton property.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well, and we also provide Master Halco service in Mount Hermon. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in Felton
A garage conversion repurposes the existing footprint, usually $30,000 – $80,000 in Felton, while a home addition involves new foundation, framing, and roofline work starting around $45,000. On sloped Felton lots, a garage conversion often avoids the expensive structural work and hillside excavation a full addition requires. Call (877) 358-6557 and we’ll walk your lot and compare both scopes.
No. Viceroy Construction is an independent general contractor. We install and repair Master Halco products because they perform well in Felton’s conditions and we know the product lines thoroughly, not because of any manufacturer relationship.
Yes, when they exist and the price is fair. We stock common Master Halco panel sections, hinges, and post bases for fast Felton turnaround. For discontinued hardware or inflated OEM pricing, we use quality aftermarket components and show you the difference before installing.
A standard residential line on a moderate Felton lot runs three to five working days, including concrete cure time. Steep slopes, redwood root clearing, or WUI site-hardening requirements can add a couple of days. We give you a written schedule before we break ground.
A single post re-set or a few matched replacement panels typically runs $400 – $1,800 depending on slope access and whether we need to work around roots. Full material costs depend on the Master Halco line you’re matching. Call (877) 358-6557 for a free quote, we’ll tell you honestly if the rest of the run is worth saving.
Service Areas Near Felton
We handle Master Halco work across the San Lorenzo Valley and the broader South Bay. If you’re up Highway 9 toward Master Halco service in West Menlo Park, down toward Master Halco service in Bonny Doon, or elsewhere in the Felton service area, we’re already working your terrain. We also cover Saratoga, Monte Sereno, Los Gatos, Cupertino, and Campbell for full-scope residential work.
Book Your Master Halco Service in Felton Today
On a sloped lot off Highway 9 near downtown Felton, a homeowner rebuilding after the CZU fire needed the property line secured before framing started. The old wood fence ran through a redwood root zone on the downhill side. We shifted to stepped Master Halco aluminum panels on deeper concrete footings set outside the root zone, hung a matching gate with adjustable hinges, and staggered panel heights so the gate wouldn’t sag the way the old one had. The owner got a non-combustible line that fit their defensible-space plan. That’s the kind of Felton-specific judgment you don’t get from a manufacturer rep or a flatland crew. Call (877) 358-6557 to schedule your free estimate.
Written by Neil Drummond, Owner at Viceroy Construction, serving Felton and the San Lorenzo Valley since 2002.