Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Lexington Hills, CA | Viceroy Construction
We install and repair Jerith ornamental aluminum fencing, gates, and railing systems throughout Lexington Hills, and we do it as an independent contractor, not a manufacturer-authorized dealer. That matters because we’re free to tell you straight when a panel is worth saving and when a rebuild is the smarter spend. If you’ve got a leaning Jerith fence line, a chalked powder-coat, or a gate that won’t latch on a steep driveway, call us at (877) 358-6557. We know how these systems behave in the Santa Cruz Mountains because we’ve worked on them here for years.
Why Lexington Hills Residents Choose Us for Jerith Service
Jerith aluminum fencing is a specific product with specific failure points, and Lexington Hills exposes every one of them. The powder-coat on a south-facing run above the fog line takes years of direct UV and wildfire-season heat. The footings on a thirty-percent grade shift with every winter rain. The gate hardware on a private road entrance grinds through its adjustment range as tree roots push against the posts. We don’t show up and figure this out on your dime. We’ve seen it on lots off Old Santa Cruz Highway, on the tight switchbacks above the reservoir, and on the graded benches where mid-century cabins sit above the road, and we’ve handled Jerith repair in Scotts Valley with similar conditions.
Neil Drummond grew up in the Saratoga foothills and trained in the building trades program at West Valley College, where framing and structural work taught him what a proper footing actually holds and what it doesn’t. That’s the lens we bring to Jerith service in Monte Sereno and here: this isn’t a panel swap. It’s a structural question about how the fence meets the slope, the soil, and the fire code. The details you don’t see are the ones that matter most.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Lexington Hills
- Post loosening and panel racking on steep grades. Jerith rackable panels are designed for slope, but the posts still need a footing deep enough to resist downhill creep. On Lexington Hills canyon lots where soil is shallow over rock, we see posts that were set too shallow and have walked out of plumb within two or three winters. We re-set them with footings keyed to the grade, not just dug to a generic depth.
- Powder-coat chalking and fade on sun-facing runs. Black and dark bronze Jerith finishes look sharp for the first few years, then the south and west exposures start to chalk. Lexongton Hills gets more direct mountain sun than the valley floor, and the coastal-influenced rain accelerates the breakdown once the coating starts to go. We tell owners honestly when a finish is salvageable with cleaning and a compatible touch-up, and when replacement pickets are the only fix that won’t look patchy.
- Corrosion and blistering at cut ends and post bases. Aluminum doesn’t rust, but it does corrode when water and mountain moisture get into unprotected metal. We see it most at field-cut picket ends and at the post-to-concrete junction where sprinkler overspray and winter rain sit against the base. On Lexington Hills properties with well water, the mineral content can be harder on exposed aluminum than municipal water.
- Gate sag and latch misalignment on sloped driveways. A driveway gate on a fifteen-percent grade fights gravity every time it swings. Jerith hinges are well-built, but the posts they’re mounted to will move as the hillside settles and tree roots expand. We re-plumb the posts, re-set the gate frame, and adjust the latch geometry so it engages cleanly without lifting the gate body.
- Old installs where previous contractors mixed parts from different manufacturers. We’ll find a Jerith panel with off-brand brackets or a replacement latch that was close enough for the last guy. Those mismatches fail early, usually at the hinge or the latch. We bring components back to Jerith spec wherever the original system is intact enough to justify it.
Jerith Service in Lexington Hills: What Local Conditions Mean for Your Equipment
The single biggest difference between fencing in Lexington Hills and Jerith repair in Cambrian Park or Campbell is that everything here runs through unincorporated Santa Cruz County, not a city building department. There’s no Lexington Hills city hall. There’s no municipal fence inspector down the street. What there is: a county permitting process and Cal Fire’s wildland-urban interface rules. A Jerith aluminum fence often has to serve two purposes here. It’s a property edge, and it’s also non-combustible defensible space, which means the county wants to see a fence that doesn’t carry flame and doesn’t block fire crew access. We keep that front of mind on every quote. A gate wide enough for an engine. A latch that releases from both sides. Posts set to survive the next big winter. No generic mountain-community page is going to tie Jerith service to that specific context.
Jerith Models & Products We Service in Lexington Hills
We work on the Jerith Classic 3-Rail aluminum fence, the Regent Series ornamental aluminum fence, and the Provincial and Provincial II picket lines. That includes the matching aluminum gate systems and railing with rackable panels for sloped runs. We use genuine Jerith replacement components, posts, pickets, rails, brackets, hinges, and latches, wherever the original system is still structurally sound. When a fitting is obsolete or no longer available, we source quality aftermarket hardware that matches the original geometry. That said, we’re not going to sell you panel-by-panel patching on a fence that’s already failing at the footings. When the powder-coat breakdown or the post movement is structural across a run, the honest recommendation is a partial rebuild or a replacement, and we’ll say so before you spend a dollar on parts. For the full range of what we do with this brand, see our Jerith sales & service page.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Lexington Hills
Here’s what independent Jerith fence and gate work runs in this part of the Santa Cruz Mountains. The numbers below are for Lexington Hills specifically, where slope, access, and county requirements shape the scope.
| Service | Typical Range |
|---|---|
| Aluminum Fence Installation (Jerith ornamental) | $4,000 – $10,000 |
| Vinyl Fence Installation (where aluminum isn’t specified) | $3,500 – $9,000 |
| Driveway Replacement (gate approach and access rework) | $5,000 – $14,000 |
What moves the price: how many linear feet of fence line, how steep the grade is, whether we’re pulling an old fence and the posts with it, and whether your gate approach needs sawcutting and rework. A free estimate from us means we walk the line, check the footings, and give you a written scope with line-item pricing before you commit. Call (877) 358-6557 to schedule yours.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well, and we also offer Los Gatos Jerith service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Lexington Hills
Yes, an aluminum Jerith fence is a non-combustible property edge, which counts in your favor under Cal Fire’s wildland-urban interface defensible-space rules for unincorporated Santa Cruz County. The key detail is that the gate and fence line still need to support fire crew access, which typically means a drive gate wide enough for an engine and latches that release cleanly from both sides. Call (877) 358-6557 if you want us to look at your existing fence and tell you whether it’ll pass the county’s review.
Because the soil on steep, wooded canyon lots is typically shallow over rock, and the seasonal wet-dry cycle causes it to shift. A post set to a standard depth on flat valley soil doesn’t have the same anchor on a twenty-percent grade off Old Santa Cruz Highway. We solve it by keying footings to the slope profile, not by just pouring more concrete in the same shallow hole.
If the finish is chalking heavily, fading unevenly, or blistering, that’s a coating failure, and the honest answer is usually replacement of the affected pickets or panels rather than a cosmetic touch-up. If it’s early-stage surface chalking on a small area, a compatible cleaning and touch-up product can buy you a season or two. We’ll tell you which one you’re looking at when we inspect the fence. Call (877) 358-6557 for a free assessment.
In many cases, yes. Because Lexington Hills is unincorporated Santa Cruz County, fence and gate permits run through the county building department, not a city office, and the county applies its own standards for height, setback, and defensible space. We handle the permit paperwork and the inspections as part of the job. Work is done to the published Jerith installation standards, but the permit belongs to the county’s process.
Yes. We order genuine Jerith components through our distributor relationships and source them to match your existing system’s model and finish. We’re independent, not manufacturer-affiliated, which means we don’t have a sales quota to hit and won’t push a replacement fence when a repair is the right call. Call (877) 358-6557 and we’ll quote the parts and labor separately so you can see exactly what you’re paying for.
Service Areas Near Lexington Hills
We run Jerith fencing and gate work through Lexington Hills and the surrounding Santa Cruz Mountains corridor. That covers Lexington Hills service area as well as Saratoga, Monte Sereno, Los Gatos, and the mountain-side edges of Cupertino and Campbell. For customers a bit farther out, see Jerith service in Loyola and Jerith service in San Jose.
Book Your Jerith Service in Lexington Hills Today
If your Jerith fence is leaning, chalked, or won’t close clean, don’t wait for the next winter rain to finish the job. Call (877) 358-6557 to schedule a walkthrough and free estimate. We’ll tell you what’s worth fixing and what isn’t.
Written by Neil Drummond, Owner at Viceroy Construction, serving Lexington Hills since the beginning of his construction career.