Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Mountain View, CA | Viceroy Construction
We install, repair, and rebuild Belgard paver and retaining wall systems across Mountain View, from Waverly Park Eichler patios to downtown infill walkways. Most Belgard work here is priced between $3,500 and $18,000 depending on scope, and the local factor that changes everything is the west side’s 1950s radiant slab copper, which forces us to scan and hand-dig before any excavation. We’re independent, not manufacturer-affiliated, and we source genuine Belgard units so repairs blend with the existing profile. Call (877) 358-6557 for a free estimate.
Why Mountain View Residents Choose Us for Belgard Service
Belgard pavers live or die by what’s underneath them. Mountain View’s late-1940s through 1960s ranch tracts sit on expansive clay that swells in wet winters and shrinks through dry summers, and that movement shows up as lippage, edge creep, and joint sand washout within a few seasons if the base wasn’t compacted and drained right the first time. We’ve corrected enough of those failures on Cambridge Cobble driveways and Urbana slab patios to know exactly what the first storm does to a poorly graded bed. Neil Drummond grew up in the Saratoga foothills and trained in the building trades program at West Valley College, where he learned concrete and structural work the slow way, and he still walks every Mountain View service area job before calling it done. The details you don’t see are the ones that matter most.
We’re a full-scope general contractor, so when a Belgard patio job on an Eichler lot also needs a drainage correction, a post-and-beam wall repair, or a reroof before the pavers go in, we handle it under one contract. No handing you off to a separate concrete crew or landscaper. That continuity matters on Mountain View’s older homes, where one problem is usually connected to three others. Our Belgard sales & service work spans the full catalog, which means we quote both the pavers and the prep work with one set of eyes on the whole scope.
Styles & brands we work with
Common Belgard Construction Problems We Solve in Mountain View
- Joint sand washout and edge creep on driveways and patios. Mountain View’s dry summers bake the polymeric sand, and when the first fall storms arrive, water moves fast across hard surfaces. Any low spot in the grade channels runoff along the edge course, washing sand and letting the border units drift outward. We reset the edges and re-sand with a quality polymeric product, then re-grade if the fall is wrong.
- Efflorescence and mortar haze on Urbana slab walkways. When moisture migrates up through the setting bed and evaporates, it leaves white mineral deposits on the slab face. We see this on shaded patios and walkways where the bed wasn’t weeped or the surface wasn’t sealed. Correcting it means cleaning, drying, and rebuilding the drainage path, not just scrubbing the surface.
- Settling over old utility trenches. On Eichler-era lots in Waverly Park and Monta Loma, original gas, sewer, and water lines were trenched decades ago, and the backfill was rarely compacted to spec. When a Belgard patio footprint crosses one of those old trenches, you’ll see a visible dip within a year or two. We excavate the trench line, compact properly, and reset the pavers level.
- Retaining wall face spalling on sloped lots. Mountain View’s wet-dry cycles punish wall block that was built without proper batter or drainage aggregate behind it. We see spalled faces and separated caps on Ancora and Brighton walls where water sat behind the block and froze the top course loose. Repair means rebuilding with drainage rock and filter fabric, not just sticking caps back on.
- Punctured radiant copper during paver excavation. This is the one that separates Mountain View from Sunnyvale or Palo Alto. Original 1950s radiant floor slabs on west-side Eichlers have copper loops close enough to the surface that a standard trenching pass can puncture the heating system. We scan every job in those tracts before anything goes in the ground.
Belgard Service in Mountain View: What Local Conditions Mean for Your Equipment
Here’s the constraint nobody mentions until a saw blade hits it. On west-side Eichler tracts like Waverly Park and Monta Loma, original 1950s radiant floor slabs run copper piping close to the surface, and that loop extends under patios, walkways, and sometimes the driveway approach. Any Belgard paver installation or repair on those lots requires a pre-construction scan and hand-digging around the heating loop before we set base or cut for borders. A puncture means jackhammering the slab to repair the line, and that’s a five-figure detour. Downtown and North Bayshore infill lots don’t carry this constraint, which is why a paver quote that works in one Mountain View neighborhood doesn’t transfer to another. When we quote Belgard repair in Loyola or anywhere else, the first thing we check is whether the lot sits on an Eichler radiant slab, because that single fact changes the excavation method, the sub-base depth, and the labor hours.
Add the clay soil and the first-storm drainage pattern, and you have a site where the failure modes are predictable. We built a Belgard Catalina patio for a homeowner in Waverly Park whose cracked concrete slab sat over radiant copper, and our crew scanned and hand-dug before anything else. We found a low spot collecting winter runoff, added drainage aggregate, re-graded away from the post-and-beam wall, then set the pavers in herringbone with polymeric sand. The heating loop was never touched, and the patio sheds water cleanly through two winters now. That’s the difference between knowing Los Altos Hills Belgard service territory and treating it like any other flat lot.
Belgard Models & Products We Service in Mountain View
We install and repair the Belgard lines most common across Mountain View’s driveways, patios, and walkways. Cambridge Cobble and Catalina profiles cover the classic running-bond and herringbone driveway looks, and we set both with proper edge restraint. Urbana Stone and similar slab systems handle walkways and patios, and we service the efflorescence and haze issues that come with slab construction. For sloped lots and grade changes, we build and rebuild Ancora and Brighton retaining wall block, including dimensional wall caps and border courses that finish patio edges and step nosings. When a repair needs matching units, we source genuine Belgard pieces so the color and profile line up with the existing course rather than standing out as a patch. And we stock the common joint sand and base aggregate locally for fast Belgard in Sunnyvale and Mountain View turnaround, because nobody wants a torn-up driveway waiting on a pallet from out of state.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Mountain View
Pricing here tracks the scope of site prep, which is the part that separates one quote from the next. A small walkway on a clean lot runs lower; a driveway that needs full base reconstruction on expansive clay runs higher. We quote written line-item estimates so you see exactly what the excavation, base, pavers, and finishing cost separately.
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
The estimate includes the scan and hand-dig on Eichler radiant lots, because that’s not an upsell, it’s the only way to work on those streets without destroying a heating system. Call (877) 358-6557 for a free written estimate with real line items.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Mountain View
Are you an authorized Belgard dealer or installer? No, we’re an independent general contractor. We install and repair Belgard products on their merits and because they perform well across the Santa Clara Valley, but we hold no dealer agreement, manufacturer authorization, or warranty endorsement. We’re independent, and that means we’ll tell you when a repair beats a rebuild rather than pushing a full replacement to move product.
Can you match existing Belgard pavers when only part of a patio or driveway has failed? Yes. We source genuine Belgard units and matching caps so new courses blend with the existing color and profile. When the failure is localized to an edge course or a settled trench line, we reset and re-sand rather than tear out the whole surface. When base failure or drainage is systemic, we’ll say so plainly and quote a full rebuild instead of a patch that drifts again in eighteen months. Call (877) 358-6557 and we’ll look at the joint lines before quoting anything.
How long does Belgard patio or driveway service take in Mountain View? A localized repair like edge resetting and re-sanding typically wraps in one to two days. A full paver patio or driveway rebuild runs one to two weeks, depending on whether we’re hand-digging around radiant copper, correcting drainage, or rebuilding the base. Eichler lots with old utility trenches add time because the excavation is slower and the compaction takes more passes.
Which Belgard models do you cover? We install and repair Cambridge Cobble and Catalina paver lines for driveways, Urbana Stone and similar slab systems for patios and walkways, and Ancora and Brighton retaining wall block for grade changes. We also handle dimensional wall caps and border courses used on patio edges and step nosings.
How much does Belgard patio repair cost in Mountain View? Minor repairs like joint sand replacement and edge resetting usually run $250 to $700, while larger paver patio installation spans $3,500 to $11,000 depending on square footage, base condition, and whether the lot requires radiant slab scanning. Call (877) 358-6557 for an exact quote. Estimates are free, written, and line-itemed.
Service Areas Near Mountain View
We serve Mountain View homeowners across 94035, 94039, 94040, and 94041, and we take Belgard projects in the surrounding South Bay. That includes Los Altos, Cupertino, Saratoga, Campbell, and the Cambrian Park neighborhoods. If your lot sits on the same clay and radiant slab conditions we see across Mountain View, check our Belgard service in Communications Hill and Belgard service in Los Altos pages for the same level of local detail.
Book Your Belgard Service in Mountain View Today
Ready to fix that washed-out edge course or quote a new paver patio? Call (877) 358-6557 and ask for Neil. We’ll walk the site, check the drainage, and give you a written estimate with real numbers. Free, no obligation, and we’ll tell you if a repair beats a rebuild.
Written by Neil Drummond, Owner at Viceroy Construction, serving Mountain View and the South Bay.