Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Lexington Hills, CA | Viceroy Construction
We provide independent Belgard hardscape construction and repair across Lexington Hills, from paver patios and retaining walls to slope-stabilized driveway aprons. What separates our Belgard work here isn’t the product line alone, it’s knowing how these systems behave on steep canyon lots where winter rain sheets off slopes and Cal Fire defensible-space rules shape every hardscape decision. Call (877) 358-6557 for a free estimate on Belgard installation or repair in Lexington Hills.
Why Lexington Hills Residents Choose Us for Belgard Service
Lexington Hills sits inside the Santa Cruz Mountains, not the valley floor, and the hardscape work here follows that terrain. We’ve installed Belgard Mega-Lafitt terrace walls, Catalina patios, and Urbana walkways on graded lots where the base prep matters more than the paver itself. Neil Drummond, our owner, grew up in the Saratoga foothills and trained in the building trades program at West Valley College, where concrete and structural coursework taught him what a properly compacted base actually needs to survive, skills he also applies to Belgard service in Monte Sereno. That matters when you’re building a Belgard patio on a 25 percent slope off Highway 17.
We’re an independent installer, not Belgard-authorized, which means we specify their products honestly and tell you when another system fits your site better. For Lexington Hills homeowners who need a paver driveway, terrace wall, or patio that doubles as fire-clearance hardscape, we handle the full scope under one contract. No juggling subs. One point of contact from tearout to final compaction.
Styles & brands we work with
Common Belgard Construction Problems We Solve in Lexington Hills
Belgard systems are solid products, but the mountain conditions around Lexington Hills expose specific failure points. Here’s what we regularly correct:
- Efflorescence and salt bloom on Catalina and Urbana pavers. Winter rain saturates the base gravel on steep lots, then wicks upward through the paver joints, leaving white mineral deposits on the surface. We strip the affected area, re-detail the drainage, and stabilize the base before re-laying with proper joint sand.
- Lafitt wall block settlement and bulging. Hillside terrace walls built without geogrid or deadman tie-backs into the slope start to lean after a few wet seasons. We rebuild the wall with tied-back structural reinforcement and match the existing Belgard caps so it reads as one continuous wall.
- Joint sand washout on walkways and driveway aprons. Long mountain driveways concentrate runoff, and standard polymeric sand can’t always hold up to that much water moving downhill. We re-grade the base so water sheds away from the paver surface, then re-fill joints with a higher-performance sand blend.
- Moss and lichen staining on shaded north-facing patios. Properties under heavy tree canopy along the Highway 17 corridor stay damp, especially on north aspects. We clean pavers without damaging the surface and recommend a joint treatment that resists the moisture-driven growth.
- Heaved or sunken paver sections after a wet winter. Poor base compaction on clay-heavy mountain soil lets water undercut the pavers from below. We lift the affected area, re-compact the subgrade, and often add drainage fabric before putting the Belgard units back.
Belgard Service in Lexington Hills: What Local Conditions Mean for Your Pavers
Lexington Hills sits in unincorporated Santa Cruz County inside Cal Fire’s wildland-urban interface, and that changes how a Belgard hardscape project should be scoped. A paver patio or driveway apron here often functions as a noncombustible ignition-resistant zone against the house, not just an outdoor living space. That’s why we grade the base so winter runoff sheds away from the foundation and choose joint sand and edge restraint that hold up to both dry-season heat and heavy seasonal rain. Fire-clearance requirements mean the paved area directly adjacent to the home is part of your defensible space profile, which is a consideration most flat-lot patio installs never touch.
Then there’s access. The private mountain roads off Highway 17 wind tight and steep, and getting a loaded paver delivery up to a Lexington Hills job site takes planning. We coordinate material drops, equipment staging, and crew access around the road width and grade. Viceroy Construction ties all of this into a single project plan, covering everything from Belgard sales & service coordination to the final drainage check. The details you don’t see are the ones that matter most.
Belgard Models & Products We Service in Lexington Hills
We work with Belgrad’s core hardscape lines: Mega-Lafitt and Mini-Lafitt retaining wall blocks, Catalina and Urbana stone pavers, Dimensions and Trellis paver slabs, and Weston and Transcend porcelain and slab pavers. For repairs and extensions, we use Belgard’s own matching wall caps, edge restraint, and paver units so courses and color lots line up with what’s already on the ground. Where aftermarket materials outperform the factory kit, we use them and say so: quality base aggregate, geogrid, and polymeric joint sand specified for mountain drainage.
Our repair stance is simple. On a failed terrace wall or a heaving driveway apron, we start with a targeted rebuild of the base and drainage. If the subgrade can be stabilized in place, we’ll save the wall or apron and avoid a full teardown. Full replacement only gets recommended when the slope or subgrade can’t be stabilized any other way.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Lexington Hills
Belgard hardscape pricing in Lexington Hills depends on access, slope, drainage work, and the condition of the existing subgrade. Here’s what our typical Lexington Hills projects run:
| Service | Typical Range in Lexington Hills |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Slope work, retaining-wall tie-backs, drainage regrading, and difficult access off narrow mountain roads all affect the final number. Our estimates are free and line-itemed. Call (877) 358-6557 and we’ll walk your Lexington Hills site, check the grade and drainage, and give you numbers you can actually compare.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well, including nearby Los Gatos Belgard service areas. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Lexington Hills
Yes, but only if the base is engineered for it. On a steep Lexington Hills lot, the most common cause of paver failure is a base that wasn’t compacted or drained correctly, not the Belgard paver itself. We re-grade the base so water moves away from the surface, add drainage where needed, and use edge restraint that anchors the system against downhill creep. Call (877) 358-6557 if you’re planning a slope-side patio and want an honest evaluation before you spend.
Belgard pavers themselves are noncombustible, so they won’t burn, but the base and joint material choices still matter for the overall ignition-resistance zone around your home. A properly installed noncombustible paver surface directly adjacent to the house can serve as part of your Cal Fire defensible-space plan. We’ll grade and detail your patio or driveway apron so it holds up under fire-safety and drainage requirements.
We stage deliveries and equipment at the nearest accessible point off Highway 17, then shuttle material down to the job site using the smallest workable equipment, a logistics approach we also use for Belgard repair in Scotts Valley. Lexington Hills roads don’t leave room for wide turns or loaded trucks, so we schedule carefully and communicate with you about every material drop. The crew handles it; you don’t manage the logistics.
That white powder is efflorescence, and it means water is wicking up through the paver base. On Lexington Hills canyon lots, heavy winter rain saturates the gravel below and carries mineral salts through the joints. The joints wash out when the base isn’t sloped to shed runoff. We fix it by removing the affected sections, re-draining the base, and re-laying with the right joint sand blend. Call (877) 358-6557 if you’re seeing this on your patio.
In most cases, yes. We order from Belgard’s current Catalina, Urbana, Mega-Lafitt, and Mini-Lafitt lines and match color lots as closely as the manufacturing run allows. If your units are discontinued, we’ll show you the closest current match and lay out a sample area so you can see it before we commit. The goal is a new section that reads as part of the original hardscape.
Service Areas Near Lexington Hills
Our Belgard hardscape crews work throughout Lexington Hills service area and the surrounding communities. We also serve Belgard service in Loyola, Belgard service in San Jose, Saratoga, Monte Sereno, and Los Gatos. If you’re in the Santa Cruz Mountains or on the valley edge, call and we’ll let you know if we cover your road.
Book Your Belgard Service in Lexington Hills Today
We install and repair Belgard hardscape across Lexington Hills, and we start every job with a free site evaluation of your slope, drainage, and access. Call (877) 358-6557 now to schedule your free estimate. One contractor, one call, one point of accountability.
Written by Neil Drummond, Owner at Viceroy Construction, serving Lexington Hills and the surrounding Santa Cruz Mountains.