Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Mountain View, CA | Viceroy Construction
We provide independent Dvele construction service across Mountain View, handling panelized wall systems, roof cassette assemblies, and full kitchen or bath remodels tied into Dvele envelopes. We also offer General Contractor in Mountain View services for projects that need full permitting and sequencing. What sets our work apart here is straightforward: we scan for 1950s radiant copper slabs before any trenching or foundation touch, because west-side Mountain View tracts like Waverly Park and Monta Loma will puncture a line if you dig blind. Call (877) 358-6557 if you own a Dvele-built home or are planning a remodel that cuts into one, and we’ll scope the job with the slab scan and seam inspection included in the free estimate.
Viceroy Construction runs a full-scope general contracting practice, not a manufacturer affiliate, so our recommendations stay honest about what a factory-built Dvele envelope can absorb and where field-built tie-ins need repair. We work across Mountain View ZIP codes 94039, 94040, 94041, and 94042. For a broader look at what we do, see our Dvele sales & service page or our Mountain View service area coverage details.
Why Mountain View Residents Choose Us for Dvele Service
Dvele’s panelized wall and roof systems don’t behave like stick framing. The factory tolerances are tighter, the seal channels are specific, and the failure modes show up differently after a few Mountain View summer-to-winter cycles. Our crews have learned those tolerances by opening up Dvele envelopes on real remodels across Santa Clara County, which means we’re not guessing when a seam weeps or a cassette interface lets water through.
Neil Drummond grew up in the Saratoga foothills and trained in building trades at West Valley College, where framing, concrete, and structural coursework gave him the foundation for scoping jobs on mid-century slabs and modern panelized assemblies alike. He’s spent nearly three decades on South Bay job sites, and he still walks every Dvele project before calling it done. The details you don’t see are the ones that matter most, and on a factory-built envelope those details live in the seal channels, the flashing transitions, and the slab beneath the panel line.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Mountain View
- Panel joint and seal channel weeping after dry-summer/mild-wet-winter cycling. Mountain View’s Mediterranean climate means long dry stretches followed by rain, and factory seals on Dvele panel joints see real thermal movement. By late fall the seams can start weeping at exactly the wrong time.
- Roof cassette-to-wall interface leaks on low-slope profiles. Low-slope and built-up roofs are common on Mountain View’s Eichler-era homes, and the factory flashing details where a Dvele cassette meets field-built curb or penetration work is where water gets in. We re-flash those tie-ins rather than caulking over them.
- Corrosion at panel interiors after remodel penetrations. When a kitchen or bath remodel opens a plumbing or electrical chase through a Dvele panel and the sheathing isn’t re-sealed properly, moisture works its way in and fasteners corrode. We re-seal every penetration with panel-system materials, never generic caulk.
- Substrate hollowing behind panels from unaddressed drainage issues. On Mountain View sites where a Dvele assembly went over an existing slab without correcting drainage first, passive moisture migration softens the substrate behind the panel. We trace the water path back to the drainage flaw before restoring the panel.
- Radiant slab punctures during foundation or trenching work. On west-side tracts, the original 1950s copper loops are shallow and unforgiving. One wrong cut with a saw or trencher and you’ve got a slab leak under a Dvele envelope. We scan first, hand-dig around the loops, then proceed.
Dvele Service in Mountain View: What Local Conditions Mean for Your Equipment
The single biggest factor that separates Dvele work in Mountain View from neighboring cities is what’s under the slab. On west-side Eichler tracts like Waverly Park and Monta Loma, the original 1950s radiant floor slabs carry copper piping that sits too close to the surface to risk mechanical trenching. Before any Dvele panel or foundation work we run a slab scan to locate those loops, then hand-dig in the flagged zones. That changes schedule on virtually every job in those neighborhoods, but skipping it turns a straightforward kitchen remodel into a slab leak repair under a factory-built envelope. The same discipline applies when a Dvele assembly went over an older slab without a drainage correction; Mountain View’s mild, wet winters push water against the panel base, and soft spots behind the panel are the tell. We see that pattern on post-and-beam ranches more than anywhere else in the South Bay.
Dvele Models & Products We Service in Mountain View
We service Dvele’s line-built panelized wall systems, factory-assembled roof cassette assemblies, and their high-performance envelope assemblies with continuous exterior insulation over OSB sheathing. On repairs we use Dvele factory sealant and flashing components where they remain available, and substitute qualified panel-system aftermarket equivalents when they’re not. That means no generic caulk or tape on an envelope seam, ever. We keep the common sealants, flashing profiles, and panel fasteners stocked for faster Mountain View turnaround, and for full-scope work we also manage kitchen remodels, bath remodels, and roof replacement under the same contract so the envelope and the interior remodel don’t get handled by two different crews with two different scopes.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Mountain View
What you’ll pay depends on whether we’re repairing a specific seam or cassette interface, or pulling a full remodel through a Dvele envelope. The ranges below are what we typically see in Mountain View, and a free estimate turns them into a fixed line-item quote before any work starts.
| Service | Typical Mountain View Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Panel seam re-flashing and cassette tie-in repairs land at the lower end, while a full kitchen cut into a Dvele wall with slab scanning and radiant-loop hand-digging pushes toward the top of the remodel range. Call (877) 358-6557 and we’ll give you an exact number with the scope written down.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well, and we also handle Dvele in Los Altos Hills. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Mountain View
Yes, in most cases a kitchen remodel can be done inside a Dvele envelope without demolishing the panel system, but it depends on where the plumbing and electrical chases need to run and whether the panel sheathing gets penetrated. The same approach works for our Sunnyvale Dvele service clients. We open only what’s required, re-seal every penetration with panel-system materials, and keep the envelope intact. Call (877) 358-6557 and we’ll tell you what your specific wall layout allows.
Dvele roof cassette seams leak because Mountain View’s dry summers bake the factory sealant, then the mild winter rains arrive and the thermal movement at the cassette-to-wall interface opens micro-gaps where the factory flashing meets field-built curb or penetration work. We re-flash those transitions with factory-equivalent sealant rather than surface-caulking. Call (877) 358-6557 for a seam inspection before the fall rain window.
Usually yes, a Dvele roof repair runs $400 – $1,800, while a full replacement on a Mountain View low-slope or built-up profile runs $8,000 – $20,000 depending on the cassette condition and tie-in work. We’ll tell you plainly when a field-built tie-in is worth restoring versus when a localized panel section replacement is the cheaper, more durable answer. Call (877) 358-6557 for a roof assessment with pricing.
Yes, on Waverly Park, Monta Loma, and other west-side Mountain View tracts with original Eichler-era radiant floor slabs, we scan the slab first and hand-dig where the copper loops run before any trenching or foundation work. Skipping that step punctures a line and turns a remodel into a slab leak repair. The scan is part of every Dvele project quote in those neighborhoods.
Mountain View’s City plan-check timelines run notoriously long, especially on permits that involve structural work or modifications to a Dvele envelope. We pull permits as the general contractor, sequence the paperwork with the material lead times, and keep the site work moving where code allows. Call (877) 358-6557 and we’ll give you a realistic schedule, not a sales schedule.
Service Areas Near Mountain View
Our Dvele service covers Mountain View and the surrounding South Bay communities. We also run crews into Saratoga, Monte Sereno, Los Gatos, Cupertino, Campbell, and Cambrian Park. For work on the far side of the valley, see Dvele service in Communications Hill. For the west foothills side, see Dvele service in Los Altos.
Book Your Dvele Service in Mountain View Today
If you own a Dvele home or are planning a remodel that will cut into a Dvele envelope in Mountain View, call (877) 358-6557 for a free estimate. Ask us about Dvele service in Loyola if your project sits near that border. We’ll put the slab scan, seam inspection, and written line-item scope on the table before any work starts.
Written by Neil Drummond, Owner at Viceroy Construction, serving Mountain View and the South Bay.